There are several reasons why the diamond saw blade cannot be cut with half of it:1: Excessive wear of the diamond segment: the main manifestations are as follows:
1) Decreased cutting efficiency: due to excessive wear, the cutting area becomes smaller, the cutting depth becomes shallower, and the cutting efficiency decreases.
2) Decreased cutting quality: the surface of the diamond segment with too much wear is not smooth, and it is easy to produce bad cutting phenomena such as burrs, cracks, and broken chips, which will affect the cutting quality.
3) The life of the segment is shortened: after the diamond segment is excessively worn, the diamond particles on the segment will fall off, resulting in poor cutting effect and shortening the life of the segment.
4) Heating of the segment: during the cutting process, due to the unbalanced cutting force, the segment is easy to be heated, and even heats up, which further accelerates the wear of the segment.
2. Blade passivation: if you often encounter hard objects during use, or fail to clean up the cutting debris and other debris in time, the surface of the diamond blade will be worn, which will make the blade dull and the cutting effect will deteriorate. The specific performance is:
1) Increased cutting force: after the segment is worn, the cutting area decreases, the friction between the tool and the cutting object increases, and the cutting force increases.
2) The roughness of the machined surface increases: after the blade is passivated, the shape of the cutting surface changes due to uneven wear, and the roughness of the machined surface will increase.
3) Decrease in processing efficiency: due to the increase of cutting force and surface roughness, the processing efficiency will decrease and the production efficiency will also be affected.
4) Shortened blade life: passivation of the blade will accelerate the wear and damage of the blade, resulting in shortened blade life.
3: The speed of the motor is insufficient, or the saw blade is stuck, or the rotation is unbalanced: During use, if the saw blade is stuck or the rotation is unbalanced, it will also cause half of the saw to not move. The specific performance is:
1) Unsmooth rotation: during the cutting process, the saw blade does not rotate smoothly, making abnormal noise or vibration.
2) Decreased cutting efficiency: due to jamming or imbalance, the cutting speed becomes slower and the cutting efficiency decreases.
3) Decreased cutting quality: due to jamming or imbalance, it will cause uneven cutting, wavy or convex and concave surface uneven problems.To sum up, if the diamond blade does not cut with half of the saw, it is necessary to check the wear of the blade, whether the blade is blunted, whether the motor speed is normal, and whether the blade is stuck or unbalanced. Timely inspection and maintenance of diamond saw blades can effectively prolong the service life of saw blades and improve cutting efficiency.

What is the reason why the diamond segment does not work with half using?
Publish date:2023-04-28 08:47:13 Article From:Linsing diamond tools Clicks: